Form N 4. Use of production capacity

In this form, the production capacity necessary for the production of products is determined, ensuring the fulfillment of concluded contracts for its supply.

Production capacity refers to the ability industrial enterprise to the maximum possible release products per year (day, shift) or the volume of processing of raw materials in the assortment provided for the planned period, with full use of production equipment and space, taking into account the use of advanced technology, improving the organization of production and labor. Production capacity calculations are made in accordance with industry guidelines.

Depending on the nature of production, the production capacity of organizations in the processing industry is characterized by output finished products or processing of raw materials per year, season, day, shift.

The production capacity of organizations is determined by the entire range of products they produce or in the range reduced to one or more types of homogeneous products taken as a unit. When determining the production capacity of an organization, all production equipment assigned to a workshop, plant, site, department is taken into account (including equipment that is inactive due to malfunction, repair, or modernization). In addition, equipment that is in the process of installation and in the warehouse, intended for commissioning in the main production in the accounting year, is taken into account.

The production capacity of the organization is determined by the power of the leader technological equipment main production workshops or plots. Leading technological equipment includes machines, devices and units on which the main operations of the technological process are performed.

The production capacity of the enterprise is calculated according to technical standards for equipment productivity and product yields from raw materials, which must be systematically revised taking into account best practices, the application of the latest achievements in the field of technology and organization of production and labor.

Technical standards for the productivity of main technological equipment and annual working time are taken into account in calculations in accordance with industry instructions for determining the production capacity of enterprises.

To determine the extent to which the organization's production capacity is used, the average annual capacity is calculated for each type of product, taking into account the commissioning and disposal of capacity during the year.

The average annual input capacity is calculated by multiplying the input capacity (replacement capacity) by the number of months of its operation until the end of the year and dividing the resulting product by 12. The average annual retiring capacity is also determined by multiplying the retiring replacement capacity by the number of months remaining until the end of the year from the moment of its disposal, and dividing the result by 12.

Annual production capacity (column 7) is determined by multiplying the average annual shift capacity (column 5) by the number of work shifts per year (column 6).

Capacity utilization (in %) is determined by dividing the annual planned output (column 8) by the annual production capacity (column 7) and multiplying the result by 100.

For organizations, workshops, sites, units, installations that are in the planning year at the stage of developing design capacities, their utilization rates (standard coefficients for developing design capacities) are established in accordance with the standards for the duration of development of design capacities of organizations and facilities put into operation as a percentage of the annual design capacity.

Planning to increase the utilization rate of average annual capacity can be carried out based on the following factors: increasing the conjugation of capacities of workshops, sections, units, installations, providing the main production facilities with capacities support services; improvement of logistics; reduction of time for development of design capacities; increasing the equipment shift ratio; improving the organization of production and labor, etc.

Calculation of the use of production capacity is made for all types of products produced by the organization.

Form No. 5. Requirement for raw materials and supplies

The production capacity of an industrial enterprise is understood as the maximum possible annual output of products High Quality or the volume of processing of raw materials (in the nomenclature and assortment provided for the planned year) with full use of production equipment and production areas, taking into account the use of advanced technology, improving the organization of production and labor. The planned production capacity of an enterprise, calculated for a certain planning period, should be distinguished from the design capacity of an enterprise, which is a predetermined value of the volume of output taken as a starting indicator for the design of an enterprise under construction or reconstruction.

In the very general view production capacity (M pr) can be expressed as follows:

M pr = Pr ob · F vr (4.1)

M pr = F vr: Tr d, (4.2)

where Pr about – equipment productivity per unit of time, expressed in pieces of products (parts); F vr – actual (working) operating time of the equipment, h; Labor intensity – labor intensity of a set of products (parts) manufactured at this equipment in standard hours, man-days.

In the task of designing an enterprise, the production program is a given value, and the composition of the enterprise, technological process production of products under this program, the structure of the equipment fleet, its quantitative and qualitative composition, the size of production areas, the nature and dimensions of buildings and structures, energy and transport facilities, etc. are the quantities we are looking for. They must be established in relation to the use of the most advanced methods of organizing technological processes and when optimal mode work of the enterprise.

In contrast, the planned production capacity of existing enterprises is determined on the basis of the applied technological processes, the available equipment stock and available production space as values ​​already specified, and the volume of output according to the planned nomenclature is the desired value, established in conditions of full use of the main production assets

Formula (4.1) is used in cases where the equipment productivity is known, expressed in the number of manufactured products (parts) per unit of time. In multi-item production enterprises, such as most machine-building plants, due to the lack of such data for the entire fleet of technological equipment, formula (4.2) is usually used. In these cases, data on the labor intensity of manufacturing products is used.

Basic provisions and initial data for determining production capacity

The production capacity of an enterprise is a calculated value, determined in accordance with methodological provisions common to enterprises in all industries, specified in industry methodologies. Thus, a unified inter-industry instruction has been approved for enterprises in the mechanical engineering and metalworking industries.

The main methodological provisions when calculating the production capacity of an enterprise are the following.

1. Calculation of production capacity is made for the entire range of products manufactured by the enterprise with the obligatory selection of products for which annual consolidated balances of production capacity are compiled. For products not core to this enterprise, production capacity

is calculated only if specialized capacities are available, otherwise the capacity for these products is taken into account among other products. Production capacity is determined in those units in which the production of these products is planned.

2. The capacity of each of the production divisions of the enterprise is expressed by the ratio (coefficient) of the actual (working) operating time of the equipment of this division to the progressive labor intensity of the corresponding annual calculated production program. Determination of the value of production capacity in physical terms is carried out, as a rule, only for the enterprise as a whole, by multiplying the estimated production program for each item by the value of the specified coefficient.

3. The production capacity of the enterprise is determined by the capacity of the leading divisions (shops, sections, units), taking into account the existing cooperation and measures to eliminate bottlenecks. The leading division is considered to be one in which the main technological operations for the manufacture of products are performed, where the largest share of total living labor is spent and where a significant part of the fixed production assets of this division is concentrated.

A “bottleneck” is understood as a discrepancy between the capacities of individual workshops, sections, groups of equipment and the capacities of the corresponding divisions, by which the capacity of the entire enterprise or workshop is determined.

Capacity calculations are carried out for all production divisions of the enterprise in sequence from the lowest production level to the highest: from groups of technologically similar equipment - to production sites, from sites - to workshops, from workshops - to the enterprise as a whole.

4. When determining production capacity, equipment downtime or underutilization of space caused by a lack of labor, raw materials, fuel, electricity or organizational problems, as well as losses of working and machine time due to defects in production, are not taken into account. Only technologically inevitable losses in the amounts established by the superior organization are taken into account.

5. The production capacity of the enterprise is dynamic, it changes due to increased labor productivity, improved organization of production,

improving the skills of workers. Therefore, the power calculation is “tied” to a specific calendar date. According to current methodology power is determined on January 1 of the plan year (input power) and on January 1 of the next year (output power). It is also customary to determine the average annual power. This indicator is used to compare with the production plan and report.

When determining input production capacity, the following are taken into account:

· implementation of measures to eliminate bottlenecks" and during the first quarter of the planning year without additional capital investments;

· introduction of progressive technological processes that do not require the manufacture of complex equipment;

· increasing equipment productivity through its modernization;

· increasing the amount of equipment or replacing it with more productive equipment using equipment in the warehouse, as well as excess and underused equipment in other production departments of the enterprise;

redistribution of work between certain types and groups of equipment and between production divisions of the enterprise;

· the possibility of increasing equipment shifts and using production space that limits product output (transferring equipment to a three-shift operating mode).

Output production capacity is calculated taking into account:

· measures planned when determining the input power to eliminate bottlenecks;

· commissioning of new production facilities at the enterprise;

· commissioning of production facilities in the process of reconstruction and expansion of the enterprise;

· increase in production capacity at an existing enterprise through the implementation of measures to improve production efficiency;

· disposal of the enterprise's facilities as a result of complete or partial cessation of production, provided that the size of the disposal facilities and the timing of their disposal are approved by a higher authority (ministry).

6. The increase in production capacity at existing enterprises due to the implementation of measures to improve production efficiency is determined on the basis of the annual plan for these measures. Measures to improve production efficiency include:

· introduction of advanced technology, mechanization and automation of production;

· modernization of equipment, equipment and tools;

· improvement of management systems, planning and organization of production;

· improvement and improvement of product quality, etc.

An increase in production volume achieved through measures to improve production efficiency aimed at developing planned production capacity is not considered an increase in production capacity.

7. When calculating production capacity, the utilization rate of the average annual capacity is determined, as well as the average equipment load factors over time. Load factors are determined by dividing the labor intensity required to manufacture products on this equipment by the actual (working) annual operating time of the equipment in a two-shift operating mode. The production capacity of the enterprise is calculated based on the following initial data:

· quantitative composition and technical level of equipment;

· operating mode of the enterprise;

progressive technical standards the complexity of manufacturing products or equipment productivity;

· product range.

Quantitative composition and technical level of equipment plays an important role in determining the production capacity of an enterprise.

The production capacity of the enterprise is determined by the available quantity and technical characteristics equipment.

Power calculations are carried out for all production equipment assigned to workshops. Production equipment includes such equipment, with the help of which the technological process of manufacturing commercial products at the enterprise is directly carried out. The calculation takes into account operating equipment and inactive equipment due to malfunction, repair, modernization, lack of loading and other reasons.

Power is not taken into account:

· equipment (within the standard) of auxiliary workshops of the enterprise (mechanical repair, electrical repair, instrumental, etc.), as well as areas of the same purpose in the main production workshops. Equipment of auxiliary workshops, similar to the equipment of the main production workshops, which is available in excess of the standard, must be included in the calculation of capacity;

· reserve equipment of the enterprise, the list and quantity of which must be approved by a higher authority.

When calculating capacity, equipment is grouped by structural production divisions of the enterprise, and within them into groups based on interchangeability, i.e. if possible, perform the same technological operations. On production lines, where operations are rigidly assigned to certain machines and where, as a result, the equipment is not interchangeable, it is grouped in the order of the sequence of technological operations. Unique equipment is allocated separately.

For workshops of a number of enterprises (for example, for some workshops of mechanical engineering, woodworking factories, enterprises light industry and other industries), the main factor determining the amount of production capacity is area. In these cases, production areas are taken into account when calculating capacity, i.e. areas where the technological process of manufacturing products is carried out. These include areas occupied by:

· production equipment; workplaces (including workbenches, assembly stands, etc.);

· backlogs (blanks, parts, assemblies) at workplaces;

· passages between equipment and between workplaces (except for main passages).

When determining power, auxiliary areas are not taken into account. These include areas:

· tool and repair shops;

· workshop warehouses and storerooms;

department premises technical control;

· departments for preparation and distribution of cooling liquids;

· other auxiliary premises;

· fire and highway passages.

The dimensions of the areas are taken according to the production and technical passport of the enterprise, and in the absence of passport data - by measurement. Measurements are made along the internal perimeter of the building or along the axes of the columns, taking into account the protruding parts of the building.

Enterprise operating hours directly affects the amount of production capacity and is set based on specific conditions production. The concept of “working mode” includes the number of shifts, the length of the working day and the length of the working week.

Depending on what time losses are taken into account when determining capacity, a distinction is made between calendar (nominal), operating and actual (working) time funds for the use of fixed production assets.

The calendar fund of time is equal to the amount calendar days in the planning period multiplied by 24 hours, i.e. for a non-leap year – 8760 hours (24 365).

The regime fund of time is determined by the production mode. It is equal to the product of the number of working days in the planning period by the number of hours in working shifts. With a five-day working week the regime fund is determined in accordance with the adopted production regime, subject to mandatory compliance with the total duration of the working week established by law.

The actual (working) operating time of the equipment is equal to the operating time minus the time for scheduled maintenance, which should not exceed established standards.

In calculations of production capacity, the maximum possible actual (working) operating time of equipment (use of production space) must be taken into account. Wherein:

1) for production and areas with a continuous production process, the annual equipment operating fund is accepted, based on three-shift (or four-shift, if the enterprise operates in four shifts) work and the established duration of shifts in hours, minus the time for carrying out scheduled maintenance, days off and public holidays, as well as reducing working hours during the holidays. The working time fund for enterprises whose leading workshops operate in two shifts (or less than two shifts) is calculated based on a two-shift operating mode. (The discontinuous process includes production

products, the stop of production of which at any moment of the technological process does not lead to the loss of products or raw materials, and the technological process can be confined to the duration work shift or working days);

2) for production and areas with a continuous production process, the annual fund of equipment operation (use of space) is accepted, based on the number of calendar days in a year and 24 working hours per day, minus the time for repairs and technological stops of equipment, if these stops are not included in the norms its use. (A continuous production process includes a technological process for manufacturing products that is continuous in nature, and stopping the production process is associated with long downtime and leads to loss of raw materials and damage to equipment or is associated with other large economic losses);

3) for unique and limiting equipment, the actual time fund is accepted, based on a three-shift operating mode. An approximate range of such equipment is given in industry instructions;

4) if workshops, areas and workplaces are equipped with equipment that does not require scheduled repairs in work time, the actual (working) operating time fund of the equipment (use of production space) of these divisions is assumed to be equal to the operating time fund.

The calculation of the production capacity of an enterprise is made on the basis of technical or design standards for the labor intensity of manufacturing products, output, equipment productivity, use of space, standards for the yield of products from raw materials, taking into account the use of advanced technology and labor organization.

If design standards are taken into account when calculating power, they are taken according to the data of the current reconstruction or construction project of the enterprise or according to the technical data sheets for the equipment.

The production standards adopted for calculating production capacity should not be lower than the actual production achieved by the leaders of production. In cases where technical or design standards for production, equipment productivity, space use, etc. are absent or surpassed by the leaders of production, production capacity is calculated according to newly developed progressive technical standards based on the sustainable achievements of the leaders of production. The norms obtained in this way are the norms of production of a worker or group of workers who have perfectly mastered advanced technology and organization of production.

When determining the production capacity of an enterprise, the range of products and the quantitative ratio of products established in the plan for the accounting year are used.

In multi-product industries (mechanical engineering, metalworking, production of rubber products, plastic products, clothing, knitwear and other industries), the production program established for the enterprise can only in rare cases be directly included in the calculation of production capacity without preliminary processing. So that the production program gives a clear idea of ​​the profile of the enterprise and is sufficiently “foreseeable”, i.e. did not contain an overly extensive range of products; it is presented in a form that would allow the volume of calculations to be reduced to a reasonable minimum. A program transformed in this manner is usually called a calculation program.

The calculation program must use the same units of measurement (pieces, tons, linear meters, square meters, rubles, etc.) that are accepted for certain products in the production program. The calculation program does not include small one-time non-recurring orders, supplies through cooperation that are not of a sustainable nature, major repairs of own fixed assets, production of spare parts for own equipment, outsourcing of works and services, etc., since enterprises do not and should not create capacities to fulfill random orders. “Clearing” the program in this regard is one of the ways to specialize production and strictly adhere to its production profile.

At enterprises that produce a large range of products, when drawing up a calculation program, the range is enlarged by combining different products into groups according to design and technological similarity and bringing each group to one basic representative product. In this case, it is necessary that the structure of labor intensity of the given products be possibly closer to the structure of labor intensity of the representative product and that the latter has the highest output and the highest total labor intensity in the group. It is also mandatory that the provided products and representative products are manufactured on the basis of mastered technological processes.

The power of continuous equipment operating at chemical plants is calculated on the basis of technical standards for the use of equipment over time and the intensity of operation of the equipment.

General formula for calculating production capacity (M):

M = a * (T – T o) *b,

where a is the number of homogeneous devices (machines); T – calendar time, hour; T o – regulated stops of one device (machine), hour; b – productivity of one device (machine) per hour.

The number of apparatus and machine hours T mch that should be used per year is calculated using the formula

T mch = (T – T o) * a.

When determining the working time fund (or the number of operator-days of work in a plan year), equipment downtime may be provided, as indicated above, in connection with the current and major repairs, as well as technological stops.

Let's assume that there are five devices installed in the workshop; in the planned year, a workshop shutdown of 10 days is provided (due to the repair of communications) and the time for current and major repairs and technological shutdowns of one device is 504 hours, or 21 days (504 / 24). The working time fund will be (365 – 21) * 5 = 1720 apparatus days. (Equipment repair coincides with communications repair. Therefore, 10 days are not included in the calculation).

After determining the number of machine-days of operation of the planning period, the amount of raw materials entering processing is calculated. The calculation can be carried out per unit of time (hour, day).

If the intensity indicator is defined as the amount of raw material supplied to the apparatus per unit of reaction volume per unit of time, then to calculate the power it is necessary to take into account the product yield from a unit of raw material, or the consumption coefficient.

The production capacity (M) of continuous devices can be calculated using the formulas:

M = (T – T o) * a * L * I n i * V p,

where L is the useful volume or area of ​​the apparatus; I n i – standard amount of raw materials per unit volume or area of ​​the i-th apparatus per hour; V p is the coefficient of yield of finished products from raw materials; r k – consumption coefficient.

If the productivity indicator is determined in units of finished products (product volume from one cubic meter of volume per day), the capacity of a continuous apparatus for the planning period will be:

M = (T – T o) * a * L * I p,

where I p is the quantity of finished products per unit volume.

For continuous processes, you can use the following formula:

M = (T – T o) * a *V*C* 10 6 * V p,

where V is the volumetric velocity, m 3 / h; C * 10 6 – concentration per ton of substance located in the apparatus.

Methodology for calculating the production capacity of periodic equipment (general calculation scheme)

The power of batch machines depends on the number of revolutions, or cycles, in a given phase of production, the amount of raw materials consumed per revolution or cycle, and the output of finished products from a unit of raw materials.

The duration of the cycle, or turnover, includes the time spent on performing all operations, from turning on the machine and loading raw materials to unloading the finished product. At the same time, for operations occurring simultaneously, the combined time costs should not be included in the cycle duration.

The production cycle usually consists of technological time and maintenance time spent on auxiliary operations. To reduce technological time, it is necessary to improve production regulations. Reduction of service time is planned on the basis of the development of organizational and technical measures aimed, in particular, at combining service time with technological time.

The power of this type of periodic equipment is calculated using the formula:

,

where I n j is the amount of raw materials consumed in one j-th cycle; In p – planned output from a unit of raw materials; T c – duration of one cycle (revolution), hour.

When several types of raw materials are loaded into the apparatus, the yield is determined by the main raw material and a coefficient characterizing the ratio of the weight of this main raw material to the weight of the total load is entered into the formula.

The power of batch equipment can also be determined based on the planned rate of intensity (or productivity), expressed in units of finished products.

Equipment productivity in units of finished products is equal to:

.

Thus, the power can be expressed by the formula

M = (T – T o) * a * I n * L.

The power indicators of apparatus units, expressed in units of products produced by the workshop, and arranged in sequential order on the diagram according to the passage of the production process, are called the workshop power profile. Drawing up such a profile allows you to clearly identify bottlenecks, the elimination of which will make it possible to increase production output.

Based on the profile data, the workshop capacity is calculated. Let us give an example of calculating the capacity of an ammonia shop under the conditions of a stepped work schedule during the planned year (Table 3).

Based on the given data, we calculate the capacity of the workshop. From the table it follows that due to repairs, not all installed units will operate simultaneously throughout the year, as indicated by columns 9, 10 and 11. The units will be repaired one by one. Given the established duration of repairs and the hourly productivity of the units, it turns out that the synthesis units will have the lowest productivity - 15 t/hour of ammonia. This unit is one of the main ones.

It will take 28 days (7 * 4) to repair four ammonia synthesis units, and during this period the workshop capacity will be 15 t/hour. The next limitation arises from the repair of treatment units; productivity 16 t/hour. 60 days (10 * 6) will be spent on repairing purification units. Therefore, in the next 32 days (60 - 28) the productivity of the entire workshop cannot be higher than 16 t/h, although the power of synthesis units after repair increases to 20 t/h . Next, 36 days (96 - 60) will be limited to compressors, the repair of which will require 96 days (24 * 4) and the minimum productivity of which is 16.5 tons/hour of ammonia. After compressors, it is time to repair air separation units. This repair will take 205 days (41 * 5), so in the next 109 days (205 – 96) it will be possible to produce only 18 t/hour of ammonia.

In the remaining 155 days (360 - 205), the workshop capacity is limited by the operation of cleaning units, the productivity of which during the operation of all units is the lowest - 19.2 t/h.

Therefore, the annual capacity of the workshop will be

(15 * 28 + 16 * 32 + 16.6 * 36 + 18 * 109 + 19.2 * 155) * 24 = 155,136 t

So, the actual hourly productivity is 18 t/h with a minimum productivity of one of the units (cleaning) 19.2 t/h. The example shows the need to produce and install equipment for which the turnaround time would be the same or at least close. Fulfilling this requirement will significantly increase product removal and reduce operating costs arising from underutilization of production capacity.

It is obvious that not only will specific capital investments per unit of output decrease, but capital productivity and labor productivity will also increase.

Table Calculation of production capacity of an ammonia workshop

Quantity

Department productivity

Workshop capacity,

driver-

maximum

minimum

Aggregates

stops

worker

renovated

quantity

quantity

departments

unit,

for repairs

units

in the unit-

in the unit-

unit

during

tov in ra-

speed, t/h

Conversions

Air separation

Compressors

Note.

gr. 4 = 360 days – gr. 3;

gr. 8 = gr. 2 * gr. 5;

gr. 10 = 360 days – gr. 7;

gr. 11 = gr. 2 * gr. 9;

gr. 12 = gr. 2 * gr. 4 * 24;

gr. 13 = gr. 4 * 24 * gr. 8.

Let's look at simplified examples of calculations of production capacity for enterprises in other industries.

In the workshop of the machine-building plant there are three groups of machines: grinding – 5 units, planing – 11 units, turret – 15 units. Time standard for processing a unit of product in each group of machines, respectively: 0.5 hour; 1.1 hour; 1.5 hours

Determine the production capacity of the workshop, if it is known that the mode is two-shift, the duration of the shift is 8 hours; regulated equipment downtime amounts to 7% of the operating time fund, the number of working days per year is 255.

Solution

2.
.

3.

4.

5.

The weaving factory operates in two shifts, the number of looms at the beginning of the year is 500. Since April 1, 60 looms have been installed, and on August 1, 50 looms have been retired. The number of working days per year is 260, the planned percentage of downtime for machine repairs is 5%, the productivity of one machine is 4 m of fabric per hour, the production plan is 7500 thousand m.

Calculate the production capacity of the fabric factory and its utilization rate.

Solution

1.
.

4.
.

Determine the workshop production capacity and capacity utilization factor under the following conditions: the number of machines of the same type in the workshop is 100 units, from November 1, another 30 units were installed, from May 1, 6 units left, the number of working days in a year is 258, the operating mode is two-shift, the shift duration is 8 hours, regulated percentage downtime for equipment repairs – 6% productivity of one machine – 5 parts per hour; The production plan for the year is 1,700,000 parts.

Solution

4.

The Research and Production Association of the Beer and Non-Alcoholic Industry has developed Instructions for calculating the production capacity of enterprises in the beer and non-alcoholic industry Food Industry TI 18-6-58-85

Federal Regulatory Service alcohol market recommends that brewing enterprises temporarily follow the guidelines (available to the Union of Russian Brewers) developed by the Scientific and Production Association of the Beer and Non-Alcoholic Industry.

This is stated in a message posted on the official website of the Federal Service.

Currently, the Federal Law "On Amendments to the Federal Law "On government regulation production and turnover ethyl alcohol, alcoholic and alcohol-containing products and limiting consumption (drinking) alcoholic products" (hereinafter referred to as the Federal Law) was approved by the Federation Council of the Federal Assembly Russian Federation(Resolution No. 297-SF dated July 10, 2013) was sent to the President of the Russian Federation, the message says.

“The federal law provides, in particular, for the exclusion of the requirement to equip by automatic means measuring and recording the volume of finished products (hereinafter referred to as ASIiU) in relation to the main technological equipment for the production of beer and beer drinks, cider, poire, mead with a production capacity of no more than 300 thousand decalitres per year.

At the same time, organizations engaged in the production of beer and beer drinks, cider, poiret, mead and having the main technological equipment for the production of beer and beer drinks, cider, poiret, mead with a production capacity of no more than 300 thousand deciliters per year, submit to the authorized by the Government of the Russian Federation Federal executive body calculation of production capacity for this equipment.

Calculation of the capacity of the main technological equipment for the production of beer and beer drinks, cider, poire, and mead is sent to the central office of Rosalkogolregulirovanie.

Until Rosalkogolregulirovanie issues an order establishing the procedure and form for calculating the capacity of the main technological equipment for the production of relevant types of alcoholic products to the specified organizations in order to exercise the right granted Federal law, when calculating the capacity of the main technological equipment for beer production, it is recommended to follow the Instructions for calculating the production capacity of enterprises in the beer and non-alcoholic food industry TI 18-6-58-85, developed by the Research and Production Association of the Beer and Non-Alcoholic Industry.