Modern mobile phones are used for more than just making calls. With their help, you can work, study, spend your free time. All of this requires access to the World Wide Web. How to connect the Internet on an Android smartphone depends on the type of access to the Web. Can connect via Wi-Fi, Mobile Internet or Personal Computer. The setup principles for Android phones are the same.
Connecting to the Internet is easy. It is important to set the correct parameters. Also, when you first install a SIM card in your phone, the provider offers automatic settings, which facilitate further installation.
Any operator mobile communications prompts the user to set automatic settings. They come in the form of SMS notifications. The owner of the smartphone needs to save the proposed settings, activate the Internet and check the performance. With the correct parameters and a positive balance on the phone, you can start searching for information on the World Wide Web.
Important! Most modern smartphones already have Internet settings installed. To connect to the network, just put a SIM card.
If auto-tuning does not come, you need to contact your service provider. To do this, call the following numbers:
- "MTS" - 0876.
- "Megafon" - send SMS with the number 1 to 5049.
- Beeline - call 06503.
- "Tele2" - 679.
The user will receive settings that should be saved.
Through a computer or laptop using a USB cable
The Internet is distributed to other devices using a computer. The user will need:
When connecting a smartphone to a PC and setting the settings, the user will have access to the World Wide Web.
Via Wi-Fi router
To connect to Wi-Fi, no additional settings are required. It is enough to turn on (activate the Wi-Fi module on your smartphone), 
choose desired network and enter her password. 
Reference. After the first login, the phone will remember the access point and you will no longer have to turn on and enter data again.
Using WPS technology
WPS technology allows you to connect to the Internet without entering a password. You need to make sure that your home router has this capability. It should have a button labeled "WPS", turn it on after the settings are set on the smartphone. 
How to turn on the Internet on Android via WPS:
If successful, the smartphone connects to the network.
Advantages and disadvantages of using the above methods of connecting to the Internet
The Internet on the phone makes the user's life more comfortable. A person always stays in touch, finds the necessary and entertaining information. Each connection method has its own advantages and disadvantages.
When buying a smartphone, you need to pay attention to its characteristics. The speed of the mobile network depends on them. The parameters specify the communication standards. These include the following (in ascending order of speed): 
- GPRS.
- EDGE.
- LTE advance.
You should also consider in what area the phone will be used. Not every operator provides 4G equipment in all cities. In small settlements, the Network is used no faster than 3G.
Wi-Fi also applies different standards. The most used is 802.11n, but in last years Modems with 802.11ac support, which provides higher speeds, have become increasingly popular.
Internet usage cost
The price depends on the tariff offered by the service provider. Mobile operators provide both unlimited access and payment for used traffic.
The cost when connecting through a home router is also different. In public places (parks, cafes, hotels) you can connect to the public network for free.
Internet quality
Network stability depends on load, power, quality of radio modules and other parameters. Urban development also has a great influence. The Internet on the street will work faster than, for example, in a room with thick walls.
Step-by-step instructions for setting up mobile Internet
To gain access, you need to perform a number of settings on your phone. How to set up the Internet on Android depends on the smartphone model, but general principle the same.
Through a mobile operator
In addition to setting auto settings, it is possible to connect a mobile phone manually. This is more complicated, but this method will be required if a specific phone model is not in the operator's database.
How to connect your smartphone to the Internet:
- Enter "Settings" - "Other networks" (the name is sometimes different).
- In "Name" enter any name (for example, by the name of the service provider).
- In the APN, enter the address of the operator ("MTS" - internet.mts.ru, "Beeline" - internet.beeline.ru, etc.).
- Set the username and password of the operator (for MTS - mts / mts, Beeline - beeline / beeline).
Through a computer or laptop using a cable
First of all, you need to connect your phone to the computer via USB. In the settings you need to allow access: in the network settings you need to right-click on the connection and select "Properties". In "Access" requires a checkmark next to the item "Allow other network users to use the connection." 
Then turn on android program tool.exe. In the window, Refresh is pressed and one of the available Select DNS is selected. Then click Connect. Upon completion of the successful completion of the procedure, the Internet will appear on the phone. 
Reference. You do not need to install the program on your Samsung phone.
Through a router
You don't need to set up your phone for a Wi-Fi network. You must enter the password for the access point. To do this, go to "Settings" and the "WiFi" section. It needs to be activated. After that, all available networks will be found, among which you need to find your own. When you click on it, a window will appear in which you enter the password. After that, you will be able to use the Internet.
Reset previous settings to set up a new connection
You can reset network settings in the "Backup and reset" section. In the "Reset network settings" item, you need to click "Reset settings". All settings will now be deleted, allowing you to reconfigure the connection. 
Possible errors and ways to eliminate them
Some mistakes that users make prevent them from joining the Network. Recommendations, "Android":
When connecting to public networks, you will need to enter a phone number. This is done in the browser after connecting to the web. At the end of the session, you need to log out of the public network. 
Conclusion
All modern mobile phones have access to the Web. To connect your smartphone to the Internet, you need to use the services of a telecom operator, via Wi-Fi or via a computer. To do this, perform a number of simple settings to enable, after which use the phone to search for information.
The Internet is an integral part of life modern man. We go to work - we look at the phone, we sit at the computer in the office, and even at home with a glass of beer we watch TV - more and more often also via the Internet, and not the central antenna. But we’ll talk about TV and strong drinks another time, but today I would like to focus specifically on mobility - how to connect the Internet via a phone, because almost no one can do without it today. In fact, connecting a modern phone, smartphone or tablet to the Internet is not so difficult. There are even several ways that we have already talked about in some articles, and today we will put them all together in order to get a complete picture.
How to connect mobile Internet to your phone?
The easiest and most affordable way to connect the Internet to a mobile phone is the so-called "mobile Internet" service, which is provided by absolutely all mobile operators. In all modern tariffs, it is already tied to the number by default, but it is worth considering that an additional fee is charged for accessing the Internet from the subscriber - each operator has its own.
It should be noted that in recent years, all leading operators have tariffs with an included package of mobile Internet traffic, which is very convenient and profitable. For example, I use Tele2, which has a cool option - exchanging minutes for gigabytes, addressed specifically for those who don’t speak much, but surf the Internet a lot via phone - I wrote a separate article about it, read it!
To activate the mobile Internet, you will have to do a few simple steps on your phone. On a standard "naked" Android, you need to enter the section "Settings\u003e Advanced settings\u003e Mobile networks" and activate the "Mobile data" mode.
Since I am currently using a Xiaomi smartphone that runs on the MIUI proprietary shell, I can show you how to turn on the Internet on Xiaomi. You need to go to "Settings" and open the "SIM cards and mobile networks" section, where you activate the "Mobile Internet" toggle switch.
By the way, there is also a traffic setting right there - if you know that the free Internet limit is limited, then by entering the value of the volume provided to you according to the terms of the tariff, the phone will track its overspending and report it using notifications.
In order to turn off the mobile Internet, respectively, you need to turn off the "Mobile data" mode.
What to do if the Internet on the phone does not work?
There may be several reasons why the Internet does not work on the phone. Most often, for some reason, Megafon subscribers ask about this, but this also happens with Beeline, MTS and Tele2. I would recommend checking your mobile hotspot settings. There is such a situation that the settings of cellular operators get lost - for example, if you bought your device over the hill and it defaults to configurations for another provider, or you often change SIM cards and the phone does not have time to adapt to them.
To fix the error, you will have to manually enter the parameters for the correct connection of the phone to the Internet. This is done in the same section "Settings - SIM cards and mobile networks", where you need to click on the name of your phone's SIM card
On this page, you can change the settings for connecting your phone to the Internet one by one.
Below is the input data for each mobile operator:
Internet settings for MTS:
- APN: internet.mts.ru
- Login: mts
- Password: mts
For Megafon:
- API: internet
- Login: gdata
- Password: gdata
For Beeline:
- APN: internet.beeline.ru
- Login: beeline
- Password: beeline
Internet on phone via WiFi
Another easy way to access the Internet from your smartphone is perfect if you are at home, in the subway or cafes - this is WiFi. There are two options to configure the distribution of the wireless signal.
- If you have already read the articles on this blog, then you probably know how the phone connects to the Internet through a wifi router. No? Then it will help you - scroll it to the end to the subsection about accessing the network from a mobile.
- The second one is not too difficult either. If you do not have a router, then we can use a personal computer or laptop as an access point. In order to do this, read about how to share a computer connection and allow other devices to go through it.
Speaking of these two methods, we mean connecting the phone to the Internet via Wi-Fi. To turn it on Android phone versions above 4.0, just go to "Settings" and move the slider to the active state.
After that, you will see a list with networks available for connection. You choose either a network with a password you know or a public network that is open to access.
The same thing happens with the iPhone - the "Settings" section, the Wi-Fi slider to the active position.
Internet connection via Bluetooth
Finally, last option Internet connection to the phone - via Bluetooth, connecting it and a computer with Internet access. The method is a little specific, since it will require additional software, a lot of settings and super-user rights (root access) on the mobile - it's easier to do it with one of the above. However, for those who wish, it will be discussed in a separate post. Wait!
Data for connecting the phone to the Internet of other operators
MTS
APN: internet.mts.ru
Login: mts
Password: mts
AT+CGDCONT=1,"IP","internet.mts.ru"
Megaphone
API: internet
Login: gdata or Login: megafon
Password: gdata or Password: megafon
AT+CGDCONT=1,"IP","internet"
motive
APN: inet.ycc.ru
Login: motiv
Password: motiv
AT+CGDCONT=1,"IP","inet.ycc.ru" or
АТ+CGDCONT=1,"IP","town.ycc.ru"
beeline
APN: internet.beeline.ru
Login: beeline
Key: beeline
AT+CGDCONT=1,"IP","internet.beeline.ru"
Tele2
APN: internet.TELE2.ru
Login: -blank-
Password: -blank-
AT+CGDCONT=1,"IP","internet.TELE2.ru"
beeline
APN: home.beeline.ru
Login: beeline
Password: beeline
AT+CGDCONT=1,"IP","home.beeline.ru"
for numbers from beeline that go
along with the modem.
U-tel
APN: internet.usi.ru
Login: -blank-
Password: -blank-
AT+CGDCONT=1,"IP","internet.usi.ru"
Smarts
APN: internet.smarts.ru
Login: smarts
Password: smarts
AT+CGDCONT=1,"IP","internet.smarts.ru"
UTEL Ukraine
APN: 3g.utel.ua
Login: gdata
Password: gdata
Access number *99#
Initialization string
AT+CGDCONT=1,"IP","3g.utel.ua"
Kyivstar Ukraine
APN www.kyivstar.net
Login: -blank-
Password: -blank-
Access number *99***1#
Initialization string AT+CGDCONT=1,"IP","www.kyivstar.net"
Yota
APN: internet.ru
Login: -blank-
Password: -blank-
Access number *99#
Rostelecom
APN: internet.ogsm.ru
Login: -blank-
Password: -blank-
Access number *99#
Beeline GPRS Ukraine
APN: internet.beeline.ua
Login: -blank-
Password: -blank-
Access number *99#
Initialization string AT+CGDCONT=1,"IP","internet.beeline.ua"
UCell Uzbekistan
API: internet
Login: -blank-
Password: -blank-
Access number *99#
Initialization string
AT+CGDCONT=1,"IP","internet"
Beeline static
APN: static.beeline.ru
Login: beeline
Password: beeline Kcell-Activ
API: internet
Login: (empty)
Password: (blank)
Initialization string
AT+CGDCONT=1,"IP","internet"
Tele2 (TELE2 KZ)
API: internet
Login: (empty)
Password: (blank)
Initialization string AT+CGDCONT=1,"IP","internet"
Beeline (Beeline KZ)
APN: internet.beeline.kz
Login: beeline
Password: beeline
Initialization string
AT+CGDCONT=1,"IP","internet.beeline.kz"
life
API:internet
Username: not needed
password: not needed
Access number: *99# MTS-Belarus
APN: mts
Username: mts
Password:mts
Beeline Ukraine
APN: internet.beeline.ua
User: don't
Password: do not U-Tel (Rostelecom)
Access point: internet.usi.ru
Username: empty
Password: blank
Call number: *99***1#
25.05.2017 22:40:00
Perhaps there is no point in buying a smartphone if you are not going to use it to access the Internet. After all, it is a multifunctional mobile gadget that becomes for the user a window into the endless world of the World Wide Web. Through a network connection, you can download an application, write an email, get the latest news, watch a video or listen to music.
In this article, we will take a closer look at how to turn on the Internet in your phone on an Android smartphone using two main modules: through two main modules: 3G / 4G or Wi-Fi.
Method 1: How to enable mobile Internet on your phone via 3G / 4G
This method is associated with the service of providing mobile Internet by a mobile operator. In this case, mobile traffic is simply connected to the selected tariff. IN this case it is important to make sure that the smartphone supports the main network communication bands.
After you have connected the communication tariff, you can proceed to setting up the mobile device:
- Enter Settings
- Choose "More"
- Click on "Mobile networks"
- Choose network type
- If you have a dual SIM smartphone in your hands, select an access point and an operator
- Go to the main screen
- Slide down the shade at the top of the display
- Click on the button to start mobile internet
Important information:
If you go to the "Data Transfer" tab, here you can find statistics on downloads, as well as the amount of traffic of applications that connect to the Internet, such as YouTube or social networks.
Method 2: How to turn on the Internet through your phone using Wi-Fi
The user should not have any problems when setting up a Wi-Fi access point to access the Network. The main thing is that in mobile device this module has been installed. To connect to the Internet via Wi-Fi, you need to do the following:
- Go to Android Settings
- Select Wi-Fi
- Click on the "Enable" button
- Select an access point from the list
- Enter the password if you are connecting to a closed point
 |
 |
 |
By the way, for the next connections to the same access point, you no longer need to dig into the settings again. If the user accesses the network through his home Wi-Fi router, he just needs to select the appropriate Wi-Fi start button in the top curtain.
A modern Android smartphone is hard to imagine without access to the Internet. In this article we will talk about how to turn on the Internet on Android smartphone using mobile communication and Wi-Fi.
In order to enable mobile Internet on Android, you need to follow a few simple steps. First, you need to turn on the Mobile Data feature. To do this, open the Android settings and go to the "Data transfer" section.
In this section, you need to find the "Mobile data" function and turn it on. Also in this section there is a function "Traffic saving". It is better to turn it off, otherwise it may block Internet access for some applications in the background.
After that, you need to return to the main settings screen and go to advanced Internet settings. To do this, open the "More" section.
To enable the Internet, here you need to select the type of network: 2G, 3G or. Now, the 3G network works with almost all operators and in all countries. But, if your mobile operator supports 4G LTE, then it is better to choose this type of network. Since 4G LTE provides top speed access to the Internet. Also in the subsection "Mobile networks" there is a function "Internet roaming". If you want to enable Internet while roaming, then this function also needs to be activated.
In most cases, the above steps are enough to enable the Internet on an Android smartphone. But, if the Internet still does not work for you, then most likely you do not have access points (APN) configured. In order to configure them, you need to open the settings and go to the "More - Mobile networks - Access points (APN)" section.
Here you can select one of the Internet access points and change its settings. You can also add an access point here. There is a plus button for this. If you do not know what settings to specify, contact the technical support of your Internet provider.
How to connect to the Internet on Android via Wi-Fi
If you want to connect to the Internet on Android using a Wi-Fi connection, then everything is much simpler than when using mobile Internet. All you have to do is open your Android settings and go to the "Wi-Fi" section.
After that, a window will appear asking for a password. Enter the password for Wi-Fi and click on the "Connect" button.
After entering the Android password, the smartphone will connect to the Internet through wireless network WiFi. At the same time, next to the selected Wi-Fi network, the inscription: “Connected” will appear.
If, after connecting to WiFi networks The Internet did not work, then, most likely, the problem is the lack of access to the Internet on the router or Wi-Fi access point.
Today, in the century information technologies, the Internet on the phone will not surprise anyone. A modern means of communication is used as a pocket computer through which you can connect to the World Wide Web in a matter of seconds, check your mail, look into, read the news, etc. But for this, of course, you need to know how to turn on the Internet on your phone. By and large, this is very easy to do, but for a beginner, such a task can be difficult. Our article will help you understand the nuances of setting up the Internet on mobile phone or smartphone.
Internet settings on different phone models may vary. For example, you can turn on the Internet on a lenovo phone in the same way as on other phones running on the Android platform - only the settings interface of your phone will differ. The Internet turns on a little differently on iOS and Windows Phone 8.
How to turn on and configure the Internet on an Android phone?
by the most in a simple way How to turn on the Internet on your phone is to use wi-fi. If your phone runs on the Android platform and you have a hotspot, then connecting to the Internet is not difficult. Such an Internet will work faster and, moreover, money will not be withdrawn from the account for using it. So what to do:
- Turn on wi-fi in the network connection settings or using the button on the main screen.
- Choose one of the available networks.
- Enter the password for a secure connection (you can get it from your network administrator). If the connection is successful, your phone will remember this network, and will automatically connect to it in the future.
- Sometimes, in addition to the password, you also need to specify other settings (access port or proxy server).
Information about APN protocols is different for each operator, it can be found on their official websites. And the access points of the most popular operators in Russia and Ukraine look like this:
If you have done everything you need to do, but the Internet does not connect, try turning your phone off and on again. Perhaps the system just needs a reboot for the new settings to become active. Also keep in mind that when connecting via 3G, you must have funds on your account.
